Thursday, October 31, 2019

Freedom of speech Essay Example | Topics and Well Written Essays - 250 words

Freedom of speech - Essay Example The law should not limit them from using the best tools available, which is what currently exists. This ban is not only discriminatory but unreasonable. It assumes that the persons involved in vandalism are under the age of 21. Further, it suggests that persons in that age group are not able to decipher what constitutes wholesome, responsible and proper behavior from what does not. This ban is an act of suppression of the right to progress beyond limits placed by the authorities. It forces persons under the age of 21 to break laws which hinders on their progress and prevents them from expressing themselves in a wholesome manner. In so doing it casts them in the light of being law breakers. It needlessly casts a level of guilt on that age group and reduces them to the level of criminals when they are really not engaged in wrongdoing. If freedom of speech is to remain the right of all this discriminatory and suppressive ban needs to be removed as it cuts at the core of creativity. The youths should not be made to pay in any way for societal problems such as that which caused the ban. Reference Find Law (n.d.). Vincenty v. Bloomberg. Retrieved from: http://caselaw.findlaw.com/us-2nd-circuit/1070582.html

Tuesday, October 29, 2019

Stoke Moran Essay Example for Free

Stoke Moran Essay In this essay I am going to compare contrast two detective stories. A pre-twentieth century story by Sir Arthur Conan Doyle called The Speckled Band a modern story by Colin Dexter called Neighbourhood Watch. I will describe the language, characters, social and historical context, Style, the plot, similarities and differences between the two. I will also state which I prefer why. The Speckled Band starts off with Miss Stoner going to Sherlock Holmess house and asking for his help. She tells him of her sisters death and of how her sister had heard a whistle at night for the past week or so. On the night of her death there was a loud scream of terror and just after a whistle Miss Stoner went to inspect quickly but as she neared her sisters room she stumbled out and said silently a speckled band. Miss Stoner was quite worried because her sister was soon to be married and now so is she. As soon as she left Dr Roylott came barging in wanting to know what Miss Stoner had come to see Holmes for. Holmes tried to put off answering Dr Roylott and answered with something about the weather. In disgust Dr Roylott picked up Holmess poker and bent it then he left. Once Dr Roylott left Holmes picked up his poker and bent it back as straight as possible in one go. Holmes and Watson soon left for Stoke Moran which is the home to DR Roylott and Miss Stoner who live with one servant. But they told the dog cart driver that took them there that they were archaeologists and were interested in the building itself. They got off the dog cart near the plantation that was on Dr Roylotts land. He let some gypsies live there and often used to go with them on voyages and trips. When Holmes started to look at the rooms he began in Miss Stoners room which was supposed to be having some repairs done to the wall because the builders punctured the wall while doing repairs in the other wing of the house. When Holmes looked at it there wasnt any repairs done to the wall and nothing wrong with it either. Holmes soon went on to the next room which was currently being used by Miss Stoner Holmes automatically noticed the ventilator and told Watson that he knew that it was somewhere near due to the fact that the dead sister could smell Dr Roylotts cigars and could hear things that Dr Roylott was doing and that meant there was some kind of connection between the rooms and a ventilator would be one of them. He also noticed that the bed was bolted to the floor which could not be moved, also there was a bell-pull which didnt ring a bell and Holmes noticed it was a dummy instantly. Holmes left that room and investigated Dr Roylotts room. He noticed only a few things but the things he noticed were a safe a saucer of milk and a lash curled up making a loop of whipcord. Holmes asked what was in the safe and Miss Stoner replied papers. She told him that she had seen inside and that was what was inside. Holmes wondered to himself in a thick cloud of smoke from his pipe. What was the milk for? Dr Roylott may have had it for his pet cheetah but a saucer wouldnt have been enough for a huge cat like that. Holmes and Watson arranged to come back after Dr Roylott had retired to his room for the night Miss Stoner would signal for them once Dr Roylott had gone to bed for the night. Holmes and Watson waited for the signal at a nearby Crown Inn. When the signal came they went up to Stoke Moran and Miss Stoner let them into her dead sisters room for the night. Holmes and Watson waited into the early hours of the morning waiting for something to happen. Soon enough Holmes got up and hit the bell-rope. Soon after there was a whistle and they soon found Dr Roylott dead and a poisonous snake in his room. In the story Neighbourhood Watch Morse begins in a pub called the Kings Arms taking his lunch hour while looking at a near 30 year old brunet when a Dr Ullman turns up and tells everybody about what had happened. He said that he had gone to the opera and when he had returned his car wasnt in the drive way. He was very worried and phoned the police although they werent much help. A few days had passed and his car had returned back in his drive with a note and an opera ticket worth i 40. Morse was quite surprised and Dr Ullman read the note. The note said Sorry for any inconvenience very sorry indeed. I just had to have a car and yours was there. Its had a shampoo and I filled the petrol tank unleaded, like it says in handbook. Your little car saved my bacon, thats the truth, and Im grateful. Please then do me the honour of accepting the enclosed ticket. I know you like the opera. I wasnt quite sure what performance to choose but Wagner is the king for me, and in my opinion Die Valkurie is the greatest thing he ever wrote. Enjoy your evening and thanks again. Morse found it quite strange for a car to be taken and not even a scratch on it in fact quite the opposite, it looked brand new. Morse soon left and set up a surveillance operation watching over Dr Ullmans house. When it was time to go round the opera Morse and Lewis were already there not very far into the surveillance operation a woman went in and posted something. Morse thought it was a free paper. Lewis soon wanted to go in but Morse told him to wait. Soon after that a man opened the gates and went and took something out of the letterbox it was a key then they noticed that it was Dr Ullman. Morse and Lewis were quite surprised to see Dr Ullman back in his home before the opera was finished. They both went home. Morse walked 300 yards home and Lewis took the van home. When Morse got home he noticed something on the table. A note. It read Sorry for the inconvenience very sorry indeed. It was the only thing worth pinching and Im hoping Ill get a good price for it. Morse leaped up the stairs to see if his tables were gone and they had. Morse phoned the police to tell them that he had been burgled the officer told Morse that it had already been reported by Dr Ullman. He said that he lived near by. Dr Ullman had got the number plate of the white self hire van. Morse went around to Dr Ullmans house and he explained all that had happened. The Language of the two stories is different in many ways. Nowadays we dont use dog carts and dont have bell-ropes in our houses like in the Speckled Band, also we dont write 70 word sentences like In glancing over my notes of Stoke Moran. We also dont call our bedroom a chamber anymore. We dont use phrases like would fain draw a little closer to the fire. Not many houses even have a proper fire in their homes nowadays anyway. The Morse story mainly contains modern language and some slang like genuine enough I reckon and so this chap this is completely differently from the 70 word sentences that are in the Speckled Band. Neighbourhood Watch contains many modern words like Tupperware, new alarm system, white self hire van or even NHS hearing aid. That makes it obvious that Neighbourhood Watch is not set in the same time period as The Speckled Band. The old words in The Speckled Band make it feel rather strange. Maybe its because I dont understand some of them but the new modern words that are in Neighbourhood Watch and everyday life dont add much of any thing to the story.

Saturday, October 26, 2019

Demolition of steel manufacturing plant

Demolition of steel manufacturing plant Introduction This report is to outline the demolition of an existing steel manufacturing plant between Sheffield and Rotherham, all buildings on the brownfield site will be demolished. The client is a major internet mail order retailer who requires a handling and distribution warehouse on the site. The report will show potential hazards that may be found on the site and precautionary measures are needed. This will involve removing the existing buildings found on the site and that adequate provisions are made to assure the local authority that any potential hazardous are removed safely and correctly from the site. The report will also contain a specification of a suitable foundation answer for the new building, and a suitable frame solution. There will be a solution for the cladding system, a method of construction for the concrete floor slab for the new building. The building will have a gross area of 13,000m2 which will incorporate high bay racking which will be used for storage of the retail products. Within the design a 600m2 office accommodation is required on site for the staff to operate the facility. The new building will be a close as possible to the boundary to allow space for vehicular access to and from the site. Demolition Under section 80 of the 1980 Building Act anyone intending to carry out demolition is required to notify the council. This outline Method Statement and all detailed Method Statements produced will be in accordance with BS 6187. Site personnel Contracts manager Safety advisor Full Time Site Manager Demolition Site Supervisor Co-ordinator Demolition operatives Plant operators Working Hours The standard working hours for a construction company are 07.30 17.30 Monday Friday. Weekend working is only arranged as necessary and by agreement with both the client and Local Authority. It is understood that restrictions on site working hours are as detailed below, and therefore conclude that the standard hours of work fall within the prescribed timings; Weekdays 7.00 19.00 Saturdays 9.00 12.00 Sundays and Bank Holidays No Work Ground Site Survey Level and water depth were inspected in this survey, as this will cause difficulties in the design of the foundation and retaining structure if there is a water table. However, from the survey it can be assumed that ground water table is not present. A Type 3 Full Access Sampling Identification Survey (Demolition/Refurbishment Surveys), should be carried out to locate and describe, as far as it is practicable, all asbestos containing materials (ACMs) in the building and may involve some destructive inspection, to gain access to all areas in the building, some may be difficult to reach or are hidden from sight. A full sampling program is undertaken to identify possibly ACMs and estimates of the volume and surface area of ACMs. Services Services are known to exist in the bordering footpaths/roads and enter the site. All services to the buildings to be demolished are to be disconnected at or beyond the site boundary prior to works commencing. The local gas and electricity suppliers will be informed for the proposed working period with the client and all statutory undertakers are to ensure that all services are identified and isolated or their positions marked as required. It is recommended that a CAT scan should be carried out before commencing of the works to locate the possibility of rouge services within the site area. If there are any services within the site which are to remain live, they will need to be assessed and protected as necessary. Carefully controlled hand excavated trial pits will be carried out as necessary to prove and verify exact location and nature of recorded services. Soft Strip A soft internal strip of the building must firstly undertaken before the main demolition the buildings are removed. All areas will be inspected prior to the works commencing. Soft strip of all flammable materials will be undertaken. The soft strip will normally undertake with hand tools. During the soft strip all operatives will be advised to be vigilant for hazardous substances or materials. Any hazardous substances or materials found shall be brought to the attention of the site supervisor who will asses these and arrange for the appropriate action to be undertaken. All necessary PPE will be provided and worn during the soft strip. Access to the roof should be limited to lowest possible practical necessity. Mechanical and demolition will be carried out where it is safe to do, as it is always the preferred method. Soft strip material arising will be disposed of via suitable skips with record maintained regarding identification and disposal. Any materials that can be re-cycled or re-used will separate from the general waste. TheManual Handling Operations Regulations 1992 (as amended) set no specific requirements such as weight limits (ref). Although it sets out no limit common sense should prevail that when lifting heavier items it should be done in teams. Movements on and off site are to be fully supervised by the ground operative at all times. Damping down measures in the form of a hand held water spray system may be adopted should the need arise. All runoff water from the suppression operations is to be channelled to the nearest low point of the building footprint. The basements are to act as soakaways for the runoff water. The constant monitoring of dust will be carried out and all necessary suppression will be implemented as determined by the site supervisor. All materials are to be removed to licensed disposal points via sheeted transport with full documentation being supplied upon completion of the works. Hard Demolition There are two main methods of demolition which are available for this type of demolition works to be carried out, they are piecemeal and deliberate explosive collapse. Piecemeal demolition involves the process of using cranes and other equipment to dismantle the building, it is a more controlled method of demolition which allows for any materials which can salvaged and re used within the project. However, it may take longer to complete the necessary works which could in turn delay the project. Demolition of buildings or structure by hand-held tools such as electric or pneumatic breakers, sometimes as a preliminary to using other methods, should be carried out, where practicable, in the reverse order to the original construction sequence. Lifting appliances may be necessary to hold larger structural members during cutting and for lowering severed structural members and other debris. Chutes may be used to discharge debris into a vehicle or hopper. Foundations would normally be grubbed up by excavation machines. When any part of a building is being demolished by a balling machine, pusher arm or similar equipment, only the machine operator and banksman should be allowed close to the working area. The cabs of all machines should be strong enough to protect the operator against the fall of debris. In particular, the windscreen and rooflight should be of shatterproof material and guarded by a grille of steel bars or a substantial mesh. The deliberate collapse of the whole or part of a building or structure requires particularly high standards of planning, supervisions and execution, and careful consideration of its effect on other parts of the structure or on adjacent buildings or structures. A surrounding clear area and exclusion zone are required to protect both personnel and property from the fall of the structure itself and debris which may be thrown up by the impact. The collapse is usually achieved either by removing key structural elements (e.g. with explosive charges) or by wire rope pulling at a high level to overturn the structure. The possible modes of failure must be studied to ensure that the method selected will produce the required pattern of collapse. If the operation is not successful, the remaining structure may be extremely dangerous for the completion of the demolition. It is therefore, recommended that the most appropriate way of dismantling the building will be through the piecemeal method of demolition. This will be the most cost effective way of dismantling the buildings. It also ensures that all of the materials that are removed can go through the re-use and re-cycle waste management system. Once the activities involved in the demolition take place, the tools and equipment required to carry out the work can be defined, these will include cranes of various types, transport equipment, bolting equipment, welding equipment including cables, guns and drying ovens, electric generators, hydraulic jacks, measuring equipment and miscellaneous equipments. The heaviest or highest element to be dismantled, or the part which requires the greatest lifting capacity (radius-weight) determines the minimum crane capacity to be used. The first stage of the hard demolition stage is to removal of the roof system. The roof system consists of steel corrugated sheeting and in order to remove the material scaffolding will need to be erected, any work carried out manually on the roof will have to have fall arrest systems in place. The next stage will be the removal of the existing cladding system on the walls of the building. This will again removed manually and may also involve the use crane machinery to safely remove the material away from the building. Subsequently the steel frame will be dismantled with the steel frame roof trusses needing to be removed first. This will involve the use carnage machinery which will be operated by a qualified Slinger with a valid CSCS card, at all times when the crane is being operated it must supervised by the site supervisor. After the trusses have been removed the steel stanchions can be removed, they must first be securely attached the crane and then the bolts can be removed manually from the foundations. All the steel removed will be salvaged and under the waste plan it will sold to a scrap yard. Lastly the concrete ground floor will be broken up and removed. The concrete will need to be grubbed first, this concrete will then be used as part of the base course for the new building foundations. This will be achieved by the use of a mobile crusher to convert the concrete into base course. This process will involve large amounts dust produced and a high degree of noise, this will be covered in section 2 of the report which will include all of the safety considerations and PPEs to be worn during the demolition stage. Hazardous materials Identification and removal of asbestos containing materials (ACMs) will be carried out prior to our commencement on site. However, given the age of the structures it is envisaged that some ACMs will remain undetected until the soft strip and main demolition works are progressed. Site Managers, Supervisors and Operatives will be briefed in this regard and a process is to be established between K D C, the client and his asbestos surveyor to minimise the potential hazard of any asbestos discovered during the works and also the potential delay to the contract. Other hazards have been identified in terms of lead paint, oil containing excessive levels of PCBs and also refrigerant from Air Conditioning systems. Samples of paint will be taken as required in order to assess any lead content if needed. In the event this registers positive, respirators with the appropriate filters will be issued. Oils will be sampled at the earliest opportunity and drained and disposed of through a licensed undertaker. Air conditioning units and associated pipe work will be de-gassed by a specialist contractor at the earliest opportunity. Arsenic is one of the likely contaminants which may be found from the ground site survey, if found in this instance then Approved Document Part C Section 2.3 of Building Regulations should be followed. Personal protective equipment All site personnel will be issued with standard personal protective equipment. Each operative will have general protection issued by the Site Supervisor dependent upon the work in hand. Safety wear will comprise of the following: Hard hats, ear and eye defenders, nasal protection against high volume of dust, dermal protection to exposed vulnerable areas and footwear against risk of penetration and impact, high visibility vests/jackets. Site perimeter Warning notices and restricted area notices will be positioned at vantage points. The permanent working area is to be protected and scaffold in accordance with the clients requirements prior to main demolition works commencing. Solid barriers will be in place to all site boundaries through the provision of either timber hoarding, solid heras type fencing or utilisation of existing boundary walls. The inner perimeter of the working area is to receive a further block and mesh hoarding as necessary to demark active demolition zones or protected services. Elevations which front public rights of way will have sentries in attendance when needed. During plant demolition the management of pedestrians and traffic will be implemented by the contractor jointly with the client/County Council/Local Highways Authority. Access and egress to the workface will be via designated routes. These will be agreed and implemented by our site supervisor. The existing road system is to be followed in accordance with the traffic management scheme to be adopted. All plant will be delivered to site by road going low loader, with no plant movements carried out on existing roadway to ensure that the road surface and also existing below ground sewers/drainage is not damaged through displacement. Workforce protection Areas of risk directly beneath the demolition area will be cordoned off and clearly segregated from third parties. Barriers are to be erected complete with warning signs. All temporary barriers and signs etc. will be constantly checked and maintained before and during each working day by the Site Supervisors. All areas of safety will be constantly evaluated with attention to detail being given the utmost concern at all times. Any secondary lighting required within the site will be the responsibility of, and provided by, the contractor in a safe and secure manner. The positioning of any lights will be in liaison with the client. The position of any lighting will be such that there is no risk imported to the adjacent operational properties. Dust noise reduction strategy Noise levels will be monitored during the course of the works. It is accepted that noise cannot be eliminated entirely, but reasonable steps will be taken to reduce any adverse effects of noise generated by the works. Previous works of this nature have been carried out and have had noise assessments produced. A table summary of these results is shown below for reference. The nature of the works and type of structures will allow controlled sectional removal of structural elements using remotely operated plant. The nature and capability of the plant proposed to be used is such that all operations will be carried out with the minimum of noise and emissions generated on the site. All of the contractors Plant and Machinery should have engines compliant with emission regulations EU Stage 3. In addition all exhaust gases are mixed with intake air to reduce particle matter and Nitrogen emissions. The location of all plant and machinery, specifically crushing plant, will be positioned as far as is reasonably practicable from sensitive receptors, specifically members of the public and adjacent residential properties. As a matter of course all plant and machinery will have the engines turned off when idling. Anticipated noise levels Activity Noise produced at Source Noise produced at site boundary Demolition Breaking slabs Crushing 93db(A) 103db(A) 89db(A) 80db(A) 85db(A) 75db(A) Suitable Foundation Solution Before deciding on a suitable foundation solution a frame proposal for the building must be provided. A large span steel portal will be used for the design of the building with a cladding system attached to this frame. It can be determined from this that the best solution for the foundation would be a pad foundation. The columns of steel framework transfer their load to the foundation by means of the base plates. The foundation bolts constitutes the unifying element between foundation and framework. In cases where the columns transfer compressive stress only, the bolts are used to locate the column correctly. The office space provided will require separate foundations, this is since it will be a cavity wall construction. Therefore, a strip foundation solution is required to spread the load from the walls uniformly. The depth of the strip foundation should be at least 0.75m according NHBC 2008 Standards Section 4.4, with the foundation spread having to be at least the width of the wall, when building on rock at 2m depth. When carrying pit excavations for the foundations it is important to ensure there is an earth support barrier. This can achieved with the use steel interlocking sheeting around the pit. Suitable Frame Proposal The most appropriate solution for the frame proposal will be multi-span large frame steel portals, a large span portal frame can span from 15m to 60m. Spacing between the frames can from 6m to 12m with the roof pitch having a low pitch between 15Â ° to 18Â °. Within the design it should incorporate high bay racking. Therefore, it is advised the portal frame should include lattice members made for lateral support, which will be required particularly in the instance of longer span frames. Multi-span portal frames are suitable for wide buildings and are economical in material usage and labour contribution. An example of the multi-span steel portal frame has been provided.

Friday, October 25, 2019

Social Conditioning of Boys Essay -- Papers Stereotypes Role Essays

Social Conditioning of Boys As everyone knows, within the human race there are males and there are females. We all figure out what our gender identity is at a young age. For boys, male toys like building blocks and trucks and sports like baseball and soccer help a boy form into what society considers to be a man. Society believes that boys should grow up to be strong, dependant and bread winning in order to be a real man. These social standards that are expected from boys, can also be explained by social roles. We are cast into social roles at the moment we are born. These social roles construct boys to be a certain way and follow the set boy code. Boy’s are taught to stay clear from emotional openness, vulnerability, and dependance. We are also taught to not let others know when we feel scared , depressed or when we are happy and in love. The most important rule altogether for boys, is to stay away from anything that people think of as being feminine. Society has made it clear that in order to be a ‘real man’, you must be a leader, successful, in control, confident, d...

Wednesday, October 23, 2019

Competition in the Golf Industry

An Analysis of â€Å"Competition in the Golf Industry† It is unknown when the game of golf originated, but it is believed that people began playing in Europe during the middle ages. In the United States, golf was a sport primarily played by the wealthy individuals until tournaments began being televised. Since then, golf has grown to be a very lucrative industry with over 27 million golfers nationwide by the end of the 1990’s. â€Å"Competition in the Golf Equipment Industry,† a case study written by John E. Gamble of the University of South Alabama, is an overview of the problems currently facing major companies in the golf equipment industry: technological limitations (due to golf’s governing organizations), a decline in the number of golfers, and the economic recession, and the threat of counterfeit products. These limitations are causing leading competitors in the golf industry, namely Calloway Golf, to rethink their strategies in 2010. PLAC Analysis for Calloway Golf Ely Reeves Calloway Jr. , Calloway’s original owner, CEO and President, bought a manufacturing company of hickory shaft wedges and putters in 1983. Calloway, originally restricted to reproducing antique golf clubs, has extended its product breadth across the golf equipment industry. Calloway Golf now encompasses drivers (with the introduction of Big Bertha), putters (with the acquisition of Odyssey), irons (designed to compete against Titleist), golf balls (with the acquisition of Top-Flite), footwear and clothes branding, and GPS units (with the acquisition of UPlay). See Timeline in Appendix 1. Calloway has differentiated itself from its competitors by its innovation, beginning with the success of their driver, Big Bertha, which initiated the technology race among firms. Calloway and its’ competitors introduce more innovative products every 12-18 months to remain competitive. Furthermore, Calloway has acquired several firms since its origination in 1983 in order to expand its product breadth. Although in 2009, Calloway Golf Company was the â€Å"second largest seller of drivers and fairway woods,† revenues have declined by 17% in 2009 compared to the first six months of 2008. Challenges facing this firm will be assessed in the SWOT analysis. SWOT Analysis for the golf industry, Calloway Golf & Recommendations See Appendix 2 for Matrix Strengths: Calloway’s technological innovation in making a driver that pushed the limits of USGA standards shows motivation to become the best. Marketing to recreational golfers in an attempt to help them enjoy the game more by offering an opportunity to drive 6-10 yards further was a benchmark and pushed Calloway’s product to the best golf product of the century by a two-to-one margin. Calloway’s recognizable name also gives them a competitive edge. Weaknesses: Although these technological advances may have boosted sales, there is still little evidence that these advances help golfers lower their scores. Another weakness of the industry is sustainability. With the development of new products every 12-18 months, it is crucial that companies market their products and have strong sales shortly after introduction. Also, a weakness with Calloway’s golf balls was their brand image with the acquisition of Top-Flite golf balls, which quickly coined the game â€Å"Rock-Flight. † Opportunities: Although sales have declined 5. 7% during 2008, continued marketing efforts and remaining a household name could prove beneficial to all firms after the recession has subsided. Due to the recession, discretionary spending has declined and savings has risen, but this could quickly change after a turn in the economy. Furthermore, Calloway has recently cut their endorsements of PGA professionals to only encompass 10 men’s PGA professionals and 5 women. If they expanded these numbers, it would give them more brand exposure and possibly higher revenues since many recreational golfers base their decisions on the type of equipment successful, professional golfers are using. Threats: There are a number of threats affecting the golf industry as a whole: effects of technological limitations by USGA, a decline in the number of golfers due to the economy and lack of leisure time, and the rise of counterfeiting. The state of the current economy paired with the decline in the number of golfers, has caused companies to focus more on price and volume. Counterfeiting is largely attributable to the decisions by executives to outsource for cheaper labor to manufacturers in China; who can produce a golf club for less than $3 per club. Recommendations Companies currently operating within the golf industry, specifically Calloway Golf, must change their current marketing approaches and strategies to withstand the recession and threats facing the industry. Although Calloway has a strong R&D department that tends to remain competitive with products and technology, there have been little results in reference to scores. It is imperative that if companies are going to market a product that will help golfers drive further and straighter that the results depict this so that not to damage the brand name of a product. Secondly, due to the decline in equipment sales and the number of golfers, prices are dropping and companies are outsourcing to maintain the volume needed to remain competitive. Companies must be cautious and aware so that counterfeiting may be reduced. This reduction would also allow companies to reduce their pricing and have more sales without the competition of these cheaply priced knock-offs. In the instance of Calloway, an increase in marketing and endorsements would boost their sales due to brand recognition. Calloway has recently fallen to second place in the amount of sales of drivers. In aiding in cutting down on counterfeiting, lowering prices, and increasing marketing and endorsements, Calloway may have the opportunity to reposition themselves as number one in the marketplace. Appendix 1 Calloway Timeline 1983- Ely Reeves Calloway, Jr. purchased a 50% interest in a Temecula, California manufacturer and marketer of hickory shafted wedges and putters for $400,000. 1985-Ely Reeves Calloway, Jr. , hired aerospace and metallurgical engineers to design the most technologically advanced golf clubs. 1991- Introduction of Big Bertha 1996- Acquisition of Odyssey (leading brand of putters)

Tuesday, October 22, 2019

Free Essays on The Apostles

definitely came true. We see that Peter and the other disciples had paid a high price by leaving their homes and jobs all to follow Jesus, by faith. On the last night, Jesus predicts Peter's denial of him in Matthew 26:33-41 and while Peter believes it to be unimaginable, he does what is predicted and denies Jesus three times that same night (Matthew 26:69-75). In Luke 22:62, it sayes that Peter wept bitterly and he did that because he realizes that he denied his Lord and because he had turned away from a dear friend who had loved and taught him for three years. ... Free Essays on The Apostles Free Essays on The Apostles Each one of the disciples were chosen and hand picked by Jesus and some had very key roles that helped fullfill the scripture. For example, Judas played the role as the traitor and turned Jesus over to his death and Matthew was the tax collector that left his booth to follow Jesus, but Peter played a very significant role according to the scriptures. Peter was a very special disciple and from the very moment that Jesus called him he dropped he and his brother drop their nets and immediately followed Jesus(Matthew 4:18-20). Although Peter played the role of a most faithful disciple to Jesus, he had his failures and successes along the way but although his walk may have not been the easiest he played a primary part in the Pentecost and in spreading the word after Jesus had ascended to heaven. In Matthew 16:16-22, we see that Peter is one of the first disciples to realize who Jesus really was as he eloquently proclaims his Lord's true identity as the Christ and also in this ! passage Peter looks to protect him from the suffering in which Jesus prophesies about. Although Jesus rebuked Peter's words of protection he, in the same breath, also praises him for his realization and tells him that he will be blessed because of it and that promise is kept later on. In Luke 18:26-30, Jesus reminded Peter that following him had its benefits as well as its sacrifices and those words definitely came true. We see that Peter and the other disciples had paid a high price by leaving their homes and jobs all to follow Jesus, by faith. On the last night, Jesus predicts Peter's denial of him in Matthew 26:33-41 and while Peter believes it to be unimaginable, he does what is predicted and denies Jesus three times that same night (Matthew 26:69-75). In Luke 22:62, it sayes that Peter wept bitterly and he did that because he realizes that he denied his Lord and because he had turned away from a dear friend who had loved and taught him for three years. ...